TITAN INSTALLATION PAGE 5
| STEP 13 |
Loosely clamp Torque strap to rear of
bike as shown.
bike as shown.
| STEP 14 |
Attach other end of Torque strap to
top of Carrier plate as shown. Align
and make all nuts tight. Now
everything should be tight and solid !!
top of Carrier plate as shown. Align
and make all nuts tight. Now
everything should be tight and solid !!
| STEP 15 |
Install throttle grip and cable to
handle bars.
handle bars.
| STEP 16 |
Put Throttle cable through bracket at
engine as shown and loop over
keeper as shown. Done !!! Install
complete !! But..You are not ready to
ride yet... Fill engine with clean motor
oil. Fill tank with clean gas. Choke it..
Pull.. And have fun..
engine as shown and loop over
keeper as shown. Done !!! Install
complete !! But..You are not ready to
ride yet... Fill engine with clean motor
oil. Fill tank with clean gas. Choke it..
Pull.. And have fun..
